Видео

For the cost, all those leaks and AC problems have to be frustrating

They made fittings for unistrut that are made per the gauge of the strut (12, 14 and 16 if I remember correctly?). The fitting I have in mind is basically what you’re doing but stronger and cleaner. The fittings for unisteut is a little pricey for what it is (between $12-$20 if my memory is right)

Another option is residential solar rails. I’ve heard but haven’t personally experienced that Unistrut collects debris because there’s no air gap. I used IronRidge XR10 rails. They’re made out of aluminum and super lightweight. A 14’ span is only 6 pounds and incredibly strong. I paid $43 per 14’ rail. Only issue is that it’s slightly more difficult to find. I got mine at a Rexel but you can try contacting a solar distributor or electrical supply business nearby for pickup.

😀👍Good Stuff, Great Tips

Factory “solar prep” is a joke if the wiring is cheap…10 or even 12 gauge.

Wait are you storing oil fluids behind the light. 🤔. Nice idea

Jesus, is that weld on the steering column for real??? Mate, take it back and get that checked ASAP!!!!!

Any tips for recovering an altered campaign? I had intended to duplicate the campaign but apparently just overrode the ads in the existing ones. The backend still shows the engagement on my ad that did really well, thousands of likes, comments, and shares, but even when I changed the ad creative back to the original, the running ad does not show the engagement. Is there a history where the changes can be undone to revert back to the original campaign and restart it?

I know everybody even myself obsesses over the oil and what kind of oil and how often to change it but if there's anything I've seen that ends up taking out a car it's normally cooling related

It's a BMW engine....leaks and component failures are engineered into it.

THANK YOU SO MUCH

Love this bumper by anychs ce do you know the weight of the rear bumper , trying to decide which spring I should be running for the rear

Will the converter and the solar power not create a conflict with charging and discharging?

If my new car had that issue, I would flip! The dealer would hear me before they see me. Like the cybertruck, some Jabronis have to buy these first so that kinks can be worked out. I am not anyone's guinea pig.

Personally I would have requested some gas struts be added to make raising the whole rig a bit easier. This config is a fine if youre perfectly fit and tall enough; but once you start getting older or more out of shape; you'll be glad for the help.

By design, the Ineos Grenadier is just trying to mimic a classic Defender.

It’s expensive to pretend you’re cool, get rid of that junk.

How bout taking it to a Ineos certified mechanic

That is one crap looking weld, especially for a $100,000 plus truck! I'm no welding god, but then again I'm not trying to sell mine.

Tire size ?

Where waws the quality check? Not good for 100K, We expect better. Lets hope J.R. sees this trouble. Someone in quality control failed.

Great weld on the silver thingy called the steering column French weld😢? Au revoir Dr Jones😅

What a crap design :(

You have a warranty, why you doin all that?

Ibex and No Boundary come with these channels, it made expanding our solar way easier

Thank you for this nice video I will order one to libya 🇱🇾

Is that a crack in the weld of the steering shaft

You saw this at “Some other random RUclips video”. If you were transparent which sorry you are not, you would link that fellow’s RUclips. He addresses many more of the details involved in mounting panels with strut channel than you seem to be aware of. Fellow rv solar installers beware.

FWIW, the answer is no. 2002 LX470 with 285/75r17 on 17x8s with zero offset, a little bit of torsion bar crank, took that pinch weld all the way back to flat and I'm still rubbing when the suspension cycles. I think they're actually rubbing on the little bolt head that holds the trim on, but they're definitely rubbing on something and they'll rub bad on the trail. Hope this helps somebody.

Great video, im planning on doing this exact same install on my 5th wheel. One question, what size bolts did you use for the drop in nut in the channel. 1/4 or 3/8? I was worried about 1/4 not being big enough for a strong wind. Also how long of bolts did you use for those, 1 inch? Thanks in advance for any information, and DIY people like me, rely on videos like yours to give us the information we need to do it ourselves. Keep up the great work.

Can you drill mounts anywhere on a rv roof or is there studs to lool for? All videos i have watched seems nobody shows them looking for studs for a solid mount.

Excellent tutorial. Thanks!

Prob won’t affect uk, Australia, Europe etc as they are rhd and not lhd like in us.

Curious why you don’t just pull the tailgate ?

I hope.all.is well. Love your chanel

Hahah comet and scuff pad is body secret to fisheye free paint job

Love the remodel.. I would recommend just popping the doors off when moving or putting cabinets up on the wall. Makes the process way way lighter and easier

This thing looks cool! Never seen an Ineos before, full walk around video?

Have you noticed how the water drains now? I’m concerned about water damming up against the strut. Maybe I’ll put some washers under the attachment points to the roof to raise the struts slightly. Overall great video, thanks!

Are you the chubby guy from the hit TV show Heroes?

Uinta precision upper? Nice build.

love this, great job!

Dude that unistrut is a great idea thanks very much !

what size kit did you use? Also How much was left over when done?

Taking the time to tape and cut those ridges out so you have a straight line on the bed shows you are a very meticulous and anal person! For something that would probably never be noticed most people would just roll with it as it is

What kind of strut, was it pre-galvanized, stainless, aluminum or? How id it holding up a year in?

should have gotten the RV-C MPPT controller and hooked it to the Jaycommand then the info would be on your phone and tablet.

Those rims are amazing!

Don't know if anyone raised this issue...but what about fuses or circuit breakers?

Hey brother so I looked up sketchup and it won’t let me use it for free. It only gives me the option to do a 7 day free trial.